Denon AVR-4806CI User Manual
132
Advanced Setup – Part 2
• For the “WIDE SCREEN” and “7CH STEREO” DSP
simulation modes, the surround speakers can be set
separately.
separately.
¢ About Speaker type setting when using both
surround speakers A and B
• If “Small” is set for either surround speakers A or B, the
output is the same as when “Small” is set for both A and
B.
B.
Settings the THX Audio Setup
1
Press the
CURSOR
D
D or H
H button to select
“THX Audio Setup” at the “Speaker Setup”
menu, then press the
menu, then press the
ENTER
button.
• Display the “THX Audio Setup” screen.
When “Yes” is selected:
“Boundary Gain Compensation” can be selected and
the compensation set to “OFF”.
If the bass sound seems too strong:
Set “Boundary Gain Compensation” to “ON”. This
activates a filter that gently reduces very deep bass
below 55 Hz to provide the flattest overall deep bass
response. Select “ON” or “OFF” according to how
strong you prefer the deep bass response to be.
“Boundary Gain Compensation” can be selected and
the compensation set to “OFF”.
If the bass sound seems too strong:
Set “Boundary Gain Compensation” to “ON”. This
activates a filter that gently reduces very deep bass
below 55 Hz to provide the flattest overall deep bass
response. Select “ON” or “OFF” according to how
strong you prefer the deep bass response to be.
4
Press the
ENTER
button.
• Return to the “THX Audio Setup” screen.
2
Press the
CURSOR
D
D or H
H button to select
“Boundary Gain Compensation”, then press
the
the
ENTER
button.
3
Press the
CURSOR
F
F or G
G button, when using
a THX Ultra2 compatible subwoofer or
subwoofer that frequency response extends to
20 Hz, select “Yes”. Otherwise select “No”.
subwoofer that frequency response extends to
20 Hz, select “Yes”. Otherwise select “No”.
2
Press the
CURSOR
D
D or H
H button to select the
surround mode, then press the
CURSOR
F
F or
G
G button to select the surround speaker.
A:
When surround speakers A is used.
B:
When surround speakers B is used.
A + B:
When both surround speakers A and B are used.
3
Press the
ENTER
button to enter the setting.
• The “Speaker Setup” menu reappears.
¢ Settings for using a THX Ultra2 compatible
subwoofer
• Make these settings when “Yes” is selected for the
subwoofer in the “Speaker Configuration” settings.
This option is not available when “No” is selected (
page 125, 126).
This option is not available when “No” is selected (
page 125, 126).