Edirol UA-20 User Manual
33
Español
Italiano
Français
Deutsch
English
Getting Connected and Installing Drivers (Windows)
9
Restart Windows.
■
Windows 98 users
The
USB composite device
driver is installed first, then the
USB audio device
driver is installed. Use the following
procedure to install the drivers.
1
With the UA-20 disconnected, start up Windows.
Disconnect all USB cables except for a USB keyboard and USB
mouse (if used).
mouse (if used).
2
Exit all currently running software (applications).
If you are using a virus checker or similar software, be sure to
exit it as well.
exit it as well.
3
Set the UA-20’s
ADVANCE (mode select) switch
to
the
OFF
position.
4
Use a USB cable to connect the UA-20 to your
computer.
computer.
fig.05-25e_30
5
USB composite device
will be detected
automatically, and the
automatically, and the
“Add New Hardware
Wizard”
dialog box will
appear. Click
[Next]
.
This unit is equipped with a
protection circuit. A brief
interval (a few seconds) after
connecting a USB connector is
required before the unit will
operate normally.
protection circuit. A brief
interval (a few seconds) after
connecting a USB connector is
required before the unit will
operate normally.
If this dialog box does not
appear, refer to
appear, refer to