Cardo Q2 User Manual

When the headset is on an active phone call, any Buddy Intercom call 

request will be rejected automatically.
Once the phone call audio link drops, you can initiate and accept 

Buddy Intercom calls.

None 

Alternating Red/blue flashes 

Rapid Red flashes 

1 blue flash every 3 seconds 

2 blue flashes every 3 seconds  Call being initiated or in 

1 red flash every 3 seconds 

2 red flashes every 3 seconds 

Solid red 

Your headset is equipped with a high-quality FM Radio receiver. This 

section explains how to enjoy the functions of the FM Radio.

The scala rider Q2 enables you to listen to FM Radio while you are 

not receiving audio from another audio source. 
While listening to the radio, you do not have to worry about missing 

any calls, as the headset automatically mutes the FM Radio and 

switches to Bluetooth headset operation when an incoming call is 

received, or when you decide to initiate a call. When the conversation 
is over, the headset automatically tunes back in to the FM Radio.

While no call is on the headset (either mobile phone call or Intercom 
call), press and hold the MC Button on your headset for three seconds 
to turn on the radio. The radio tunes in to the last radio station you 
were listening to. With some phones you should wait a few seconds 
after ending a call before turning on the Radio.

While the radio is turned on, press and hold the MC button for three 

seconds to turn the Radio off.

There are six pre-set Radio stations available on your scala rider Q2. 

While the Radio is on, tap the MC Button to cycle between saved 

stations.

Searching for a New FM Radio Station
While the Radio is on, press and hold the Volume Up or Volume 
Down Button for three seconds or until you hear the next station on 
your headset.
Pressing Volume Up will search upwards (higher frequency). Pressing 
Volume Down will search downwards (lower frequency). Once a 
station is found, searching stops and you can hear the station.

To save this station, refer to the following section.

To continue searching, press the Volume Up or Volume Down Button 

again for three seconds.

You may still continue to listen to the current unsaved station. 

Pressing the MC Button in this case will switch to the next saved 

station.