Cardo Q2 User Manual

The FM Radio is equipped with a memory capacity of six stations.

• Select the station you wish to replace by tapping the MC button 

until you find the station you want to replace.

• Search for a new station as described above.
• Tap the MC Button within 20 seconds of finding the station to 

save the current station.

If you don't save the station, the Radio will exit search mode without 

saving the current station. You can still continue to listen to the 

current unsaved station. Tapping the MC Button in this case will 

move to the next saved station.

Your scala rider Q2 headset can be connected to an MP3 

player device by plugging it to the Helmet Clamp’s jack with 

the MP3 cable.

At your option, you may further secure the MP3 cable by using the 

MP3 cable holder. For this purpose please proceed as follows:

1. Use the enclosed Allen Wrench to 

remove both Allen screws from 

Helmet clamp and release the 

clamp’s back plate. 

2. Place the MP3 cable holder on the 

helmet clamp. Both pins on the MP3 

cable holder should be fixed into 

corresponding indentations on clamp. 

3. Place the Back Plate on top of the MP3 cable holder and secure 

all parts together using the Allen screws that were previously 

removed, as shown in photo.

4. Attach the clamp and headset onto your helmet as described 

previously in section “ATTACHING THE CLAMP ON THE HELMET”.

5. Attach the speakers to your helmet as described in section 

”POSITIONING THE SPEAKERS”.

6. Connect the MP3 cable to your MP3 

player device’s jack and the other 

side to the helmet Clamp’s jack, 

inserting the cable through the MP3 

cable holder.
Make sure that the cable plug clicks 

into place.

7. Tuck the MP3 cable into the hook of the MP3 cable holder. 

8. In order to use your MP3 player, power on the headset to have it 

on Standby mode, flashing slowly in Blue.

NOTE: Operate the MP3 Player device by using its buttons (FF/REW/

For additional information please visit our website at
www.cardosystems.com 
FAQ: www.cardosystems.com/support/faq
or contact us at:
support@cardosystems.com

Phone:   USA and Canada – + 1-800-488-0363

International – +4989 450 36819