Xerox 785 User Manual
Transmitting Documents
WorkCentre Pro 665/685/765/785
5-7
Direct Send with Memory Send Selected
When free memory becomes 0% due to many job reservations, a
Direct Send transmission can be performed manually even when the
default transmission mode is set to “Memory Send” (see “Memory
Send or Direct Send Default Mode” earlier in this Chapter).
Direct Send transmission can be performed manually even when the
default transmission mode is set to “Memory Send” (see “Memory
Send or Direct Send Default Mode” earlier in this Chapter).
To manually perform a Direct Send transmission:
1.
Load the document face down in the Document Tray.
2.
Select the desired
Resolution and Contrast.
3.
Press:
4.
Press
to send the document.
To return to the Standby Mode without sending the document,
press .
5.
Using one of the dialing methods, enter the fax number and press
Enter, if needed.
Enter, if needed.
The machine assigns a job number, dials the number and transmits
the pages as they are scanned.
the pages as they are scanned.
Note:
If Direct Send is enabled, the document remains in the
Document Tray until the document is transmitted.
Document Tray until the document is transmitted.
Note:
You can select another option for this job. Refer to the
selected option for the procedure.
selected option for the procedure.
Direct
Send
Send
Direct send
1. Yes
2. No
1. Yes
2. No
Free memory:
80%
Enter fax number