Xerox 32N00467 User Manual
Page 5-26
Xerox WorkCentre 4118 User Guide
F
a
x
(4
in 1 on
ly)
Auto Reduction
On
Use to activate the machine performing an
automatic reduction for over-sized fax jobs.
automatic reduction for over-sized fax jobs.
Off
Use to de-activate the automatic reduction.
Over-sized jobs are printed on two pages.
Over-sized jobs are printed on two pages.
Prefix Dial
Up to 5 digits
The number entered will be added to the
beginning of each fax sent.
beginning of each fax sent.
Auto Report
On
Use to enable a report listing details about the
previous 50 communication operations.
previous 50 communication operations.
Off
ECM Mode
On
Use to switch on ECM for all transmissions.
Transmission time may be increased when
ECM is enabled.
Transmission time may be increased when
ECM is enabled.
Off
Use to switch off ECM.
Redials
[0 - 13]
Use to set the number of redial attempts.
Ring to Answer
[1 - 7]
Use to set the number of rings before
answering. This feature is disabled when
Receive Mode is set to Ans/Fax.
answering. This feature is disabled when
Receive Mode is set to Ans/Fax.
Redial Term
[1 - 15]
Use to set the number of minutes between
redial attempts.
redial attempts.
Ringer
Off
Use to set the ringer volume.
Low
Med
High
Junk Fax Setup
On
Use to restrict receipt of junk mail by only
allowing faxes to be received from remote
machines registered on your machine.
allowing faxes to be received from remote
machines registered on your machine.
Off
Secure Receive
On
Use to set the default option for receiving
secure faxes.
To switch On, enter passcode, then confirm
passcode.
To switch Off, enter current passcode. Any
secure faxes still in memory will be printed.
secure faxes.
To switch On, enter passcode, then confirm
passcode.
To switch Off, enter current passcode. Any
secure faxes still in memory will be printed.
Off