Canon 2830 User Manual
Error Messages
8-8
8
T
rou
b
lesh
o
o
ti
ng
NetWare is in use. Wait for a moment, then perform operation again.
Cause
You cannot browse the network because NetWare is printing through a PServer
or NDS PServer.
or NDS PServer.
Remedy
Wait until printing is complete, and try browsing again.
Check the TCP/IP.
Cause
The machine's TCP/IP connection is not operating.
Remedy
Check the IP Address Settings (IP Address, DHCP, RARP, BOOTP) in TCP/IP
Settings in Network Settings in System Settings (from the Additional Functions
screen). (See Chapter 3, "Using a TCP/IP Network," in the Network Guide.)
Settings in Network Settings in System Settings (from the Additional Functions
screen). (See Chapter 3, "Using a TCP/IP Network," in the Network Guide.)
Cannot find the selected server. Check the settings.
Cause
The IP address that the machine should connect to cannot be determined.
Remedy 1 Check the DNS Server Settings in TCP/IP Settings in Network Settings in
System Settings (from the Additional Functions screen). (See Chapter 3, "Using
a TCP/IP Network," in the Network Guide.)
a TCP/IP Network," in the Network Guide.)
Remedy 2 Check whether the DNS server's DNS settings are correct.
Cannot connect to the selected server. Check the settings.
Cause
The machine cannot connect to the specified IP address/port.
Remedy
Check the Gateway Address setting in IP Address Settings in TCP/IP Settings
in Network Settings in System Settings (from the Additional Functions screen).
(See Chapter 3, "Using a TCP/IP Network," in the Network Guide.)
in Network Settings in System Settings (from the Additional Functions screen).
(See Chapter 3, "Using a TCP/IP Network," in the Network Guide.)
List of Error Codes without Messages
If an error occurs while a document is being sent or received, an error code is
displayed on the job log on the System Monitor screen, and is included in various
reports. Check what the error code is, and then take the required steps to solve the
problem. (See Chapter 4, "Checking/Changing the Fax Status," and "Report and
List Samples," on p. 9-2.)
displayed on the job log on the System Monitor screen, and is included in various
reports. Check what the error code is, and then take the required steps to solve the
problem. (See Chapter 4, "Checking/Changing the Fax Status," and "Report and
List Samples," on p. 9-2.)