Avaya G350 User Manual

Step 1: Test the installation

When the supporting technician has finished the remote configuration, perform the following steps:

These steps are described below.

When the installation is complete, simple tests must be performed to test telephone and data connectivity. 
The supporting technician will test your remote data connectivity for you.

Test local data connectivity on-site by checking that you can send an email between two PCs that are 
connected to the G350. 

You should test telephone connectivity from the site yourself. To test telephone connectivity, perform the 
following tests:

Test each telephone

Test each trunk

Perform Local Survivable Processor (LSP) Failover test if you have an S8300 installed as an LSP.

Make outgoing calls from the telephone. Make sure you hear a dial tone when you pick up the 
receiver. Make sure you can make both an internal (within the local network) and an external 
(outside of the local network) call.

Make a call to the telephone from both within the network and outside of the network.

Make outgoing calls from the trunk. Ask the service center technician for instructions how to 
access the trunk. Make sure you can make both an internal (within the local network) and an 
external (outside of the local network) call.

Make a call to the trunk.