NEC NDA-24233 User Manual
Page 3-16
NDA-24233 Issue 2
Console Command List
VisuaLink 128/384 Engineering Guide
3.3 LINE Setting Command
SNET
Setting Network Type (P x 64/56)
3-1
Note:
The command can only be issued when the VisuaLink is not in a call.
RNET
Checking Network Type Setting (P x 64/56)
3-2
Description:
Sets a network type (P x 64/56). Some networks use 8 kbps out of the 64
kbps for network control information, so the network available for users
may be limited to P x 56 kbps. When connecting to the network, check if
it is a limited network (P x 56) or clear network (P x 64).
kbps for network control information, so the network available for users
may be limited to P x 56 kbps. When connecting to the network, check if
it is a limited network (P x 56) or clear network (P x 64).
Command Format:
SNET p1
p1:
Px64: Clear Network Type
Px56: Limited Network Type
Px56: Limited Network Type
Response:
Normal Response: OK
Error Response:
Description:
Checks the current network setting (P x 64/56).
Command Format:
RNET
Response:
Normal Response: p1 OK
p1: Px64: Unlimited network
Px56: Limited
network
Error Response: