Nortel Networks NN44200-313 User Manual
Configuring system parameters (LD 17)
19
Prompt
Response
Notes
ELAN
xx
Enter the number entered for
the ELAN ID above.
the ELAN ID above.
SECU
YES
5
To exit the overlay, enter ****.
Tech tip: To view the new ELAN, enter LD 22. Enter PRT at the REQ
prompt, then ADAN. A list of all provisioned IDs appears. Use the
capture text function in hyperterminal to save a text file of the output.
prompt, then ADAN. A list of all provisioned IDs appears. Use the
capture text function in hyperterminal to save a text file of the output.
—End—
Configuring system parameters (LD 17)
Tech tip: To view a list of all provisioned system parameters, enter LD 22
and enter PRT at the REQ prompt, then CFN. Use the capture text function
in hyperterminal to save a text file of the output.
and enter PRT at the REQ prompt, then CFN. Use the capture text function
in hyperterminal to save a text file of the output.
Step
Action
1
Connect to the PBX.
2
Enter LD 17.
3
Enter the appropriate values as described in the following table.
For prompts not listed in the following table, press Enter to accept
the default.
For prompts not listed in the following table, press Enter to accept
the default.
Table 4
LD 17 - Configuring system parameters
LD 17 - Configuring system parameters
Prompt
Response
Notes
REQ
CHG
TYPE
PARM
NCR
xxx
Enter the number of DS0
channels multiplied by 2 plus
the current NCR.
channels multiplied by 2 plus
the current NCR.
For example, if the current NCR
is 500 and there are 24 DS0
channels, enter 548.
is 500 and there are 24 DS0
channels, enter 548.
Nortel CallPilot
Quickstart Guide
NN44200-313
01.02
Standard
5.0
19 May 2008
Copyright © 2007-2008, Nortel Networks
.