Raritan Computer EMX2-111 User Manual
Chapter 7: Event Rules, Event Actions and Application Logs
154
Event/Context
Default Assertion Message when
the Event = TRUE
the Event = TRUE
Default Assertion Message
when the Event = FALSE*
when the Event = FALSE*
Power Logic Device > * >
Sensor > * > Below lower
critical threshold
Sensor > * > Below lower
critical threshold
Sensor '[PLSENSORNAME]' on Power
Logic Device at [PORTTYPE] port
'[PORTID]' asserted 'below lower
critical' at [SENSORREADING]
[SENSORREADINGUNIT].
Logic Device at [PORTTYPE] port
'[PORTID]' asserted 'below lower
critical' at [SENSORREADING]
[SENSORREADINGUNIT].
Sensor '[PLSENSORNAME]' on
Power Logic Device at
[PORTTYPE] port '[PORTID]'
deasserted 'below lower critical' at
[SENSORREADING]
[SENSORREADINGUNIT]."))
Power Logic Device at
[PORTTYPE] port '[PORTID]'
deasserted 'below lower critical' at
[SENSORREADING]
[SENSORREADINGUNIT]."))
User Activity > * > User
accepted the Restricted Service
Agreement
accepted the Restricted Service
Agreement
User '[USERNAME]' from host
'[USERIP]' accepted the Restricted
Service Agreement.
'[USERIP]' accepted the Restricted
Service Agreement.
User '[USERNAME]' from host
'[USERIP]' declined the Restricted
Service Agreement.
'[USERIP]' declined the Restricted
Service Agreement.
*Note: Not set for 'trigger' events (see [ASSERTION] ctx)
Sample Event Rules
Sample Asset-Management-Level Event Rule
In this example, we want the EMX to record in the internal log when an
asset sensor network link goes up or down. The sample event rule looks
like this:
asset sensor network link goes up or down. The sample event rule looks
like this:
Event: Device > Network interface link state is up
Trigger condition: Both
Actions: System Event Log Action
To create the above event rule:
1. Enter a name for the rule.
2. Select the Enabled checkbox to enable the rule.
3. From the Event drop-down, select Device > "Network interface link
state is up". These selections indicate we are specifying an event
regarding asset sensor management, and we want the EMX to
respond to the event related to physical connections and/or
disconnections.
regarding asset sensor management, and we want the EMX to
respond to the event related to physical connections and/or
disconnections.
4. Select the Both radio button since we want both connection and
disconnection actions to be recorded when either action is taken.