Raritan Computer EMX2-111 User Manual

Chapter 7: Event Rules, Event Actions and Application Logs

156

4. Select "<Any sub-event>" because we want to specify all events

related to the sensor connected to sensor port #1, including the
sensor's unavailable state and threshold-crossing events -- "Above
upper critical, "Above upper warning," "Below lower warning," and
"Below lower critical."

5. Select "System SNMP Notification Action" as we want to send SNMP

traps to respond to the specified events when these events occur.

Sample User-Activity-Level Event Rule

In this example, we want the EMX to record the user activity event in the
internal log when any user logs in or logs out. The event rule is set like
this:



Event: User activity > Any user > User logged in



Trigger condition: Both



Actions: System Event Log Action

To create the above event rule:

1. Select "User activity" in the Event field to indicate we are specifying

an event regarding the user activity.

2. Select "<Any user>" from the submenu because we want to record

the activity of all users.

3. Select "User logged in" to select the user login-related events.

4. Select the Both radio button since we want both login and logout

actions to be recorded when either event occurs.

5. Select "System Event Log Action" as we intend to record this event

in the internal log when the specified events occur.

Modifying an Event Rule

You can change an event rule's event, action, trigger condition and other
settings, if any.

Exception: Events and actions selected in the built-in event rules are not
changeable, including System Event Log Rule and System SNMP
Notification Rule.

To modify an event rule:

1. Choose Device Settings > Event Rules. The Event Rule Settings

dialog appears.

2. On the Rules tab, select the event rule that you want to modify in the

left pane.

3. To disable the event rule, deselect the Enabled checkbox.