Promise Technology M300p User Manual

Page of 322
VTrak M-Class Product Manual
272
Battery is charging
Battery is being recharged.
Battery reconditioning is 
complete
Battery reconditioning is finished.
Battery is malfunctioning
Run battery reconditioning. See page 121. If this 
message reappears, replace the battery.
Battery reconditioned 
successfully
Battery reconditioning is finished.
Battery reconditioning has 
failed
Replace the battery. See page 230or page 233.
Battery is reaching end of 
life
Replace the battery. See page 230or page 233.
Battery is removed
The battery was disconnected or removed. Reinstall 
the battery. See page 230opage 233.
Battery charging failed
Replace the battery. See page 230or page 233.
Battery reconditioning 
started
Battery reconditioning has begun.
Battery recondition 
terminated
The battery was disconnected or removed during 
reconditioning. Reinstall the battery. See page 230o
page 233.
Blowers
Blowers have started
Normal.
Blowers have stopped
Verify that the cooling unit is properly installed. If the 
blower still does not turn, replace the blowers. See 
page 221 or page 226.
Blower speed is 
increased
Check the VTrak for overheating. See page 289.
Blower speed is 
decreased
Temporary overheat condition was corrected.
Blowers are NOT 
functioning
Replace the blowers. See page 221 or page 226.
Blowers have been 
inserted
Normal.
Blowers have been 
removed
Reinstall the cooling unit(s). If the blowers does not 
turn, replace the blowers. See page 221 or page 226.
Blowers are functioning 
normally
Normal.
Event
Action