Manualsbrain.com
  1. Manuals
  2. Brands
  3. Siemens
  4. S223
  5. User Manual

Siemens S223 User Manual

Download
Page of 381
User Manual                                                                               UMN:CLI 
SURPASS hiD 6615 S223/S323 R1.5 
A50010-Y3-C150-2-7619                                                                         35 
3.1.12 
Route-Map Configuration Mode 
To open Route-map Configuration mode, use the following command. The prompt is 
changed from SWITCH(config)# to SWITCH(config-route-map)#. 
Command Mode 
Description 
route-map
 NAME {permit | deny} 
<1-65535> 
Global Opens 
Route-map Configuration 
mode. 
 
On  Route-map Configuration mode, you can configure the place where information is 
from and sent in routing table. 
Tab. 3.12 shows a couple of important main commands of Route-map Configuration 
mode. 
Command Description 
match 
Transmits routing information to specified place. 
set 
Configures router address and distance. 
Tab. 3.12 
Main Commands of Route-map Configuration Mode