Siemens S223 User Manual

UMN:CLI                                                                                                                                                              User  Manual 

SURPASS hiD 6615 S223/S323 R1.5 

34                                                                         A50010-Y3-C150-2-7619 

To open Router Configuration mode, use the following command. The system prompt is 
changed from SWITCH(config)# to SWITCH(config-router)#. 

 IP-PROTOCOL Global 

Opens 

 mode. 

 

Routing functionalities such as RIP, OSPF, BGP, VRRP and PIM-SM are only available for 
hiD 6615 S323. (Unavailable for hiD 6615 S223) 

According to routing protocol way, Router Configuration mode is divided into BGP, RIP, 
and OSPF. They are used to configure each IP routing protocol. 

Tab. 3.10 shows a couple of main commands of Router Configuration mode. 

Configures distance value to find better route. 

Configures neighbor router. 

Configures network to operate each routing protocol. 

Registers transmitted routing information to another router’s table. 

Main Commands of Router Configuration Mode 

 

 

To open VRRP Configuration mode, use the following command. The system prompt is 
changed from SWITCH(config)# to SWITCH(config-router)#. 

 INTERFACE GROUP-

 

Global Opens 

 mode. 

 

Tab. 3.11 shows a couple of main commands of Router Configuration mode. 

Configures associated IP address same with virtual router. 

Configures password of virtual router group. 

Activates/deactivates preempt. 

Configures VRRP track. 

Configures the function of accessing associated IP address. 

Assigns priority to virtual router. 

Configures advertisement time, which means the interval that master 
router distributes its information to another virtual router. 

Main Commands of VRRP Configuration Mode