Siemens SX763 User Manual
125
Installing the printer port for network printers
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / printer.fm / 08.12.2006
Sc
hablone 2
004_
08_2
6
ì
If you do not wish to install a printer until later, click Cancel.
Installing a printer on the TCP/IP port retrospectively
If you connect a printer to this port at a later stage, start the installation procedure for
the printer port as above.
the printer port as above.
ì
In this case, however, you should click the selection menu in the Select a Printer
Port window.
Port window.
ì
From the list, select the connection you have set up:
e.g. Gigaset_printerport (default TCP/IP port).
e.g. Gigaset_printerport (default TCP/IP port).
ì
Click Next and finish installing the printer driver as instructed in the windows that
follow.
follow.
Note:
The print server of the Gigaset SX763 WLAN dsl does not work bidirectionally. It does
not evaluate any of the printer's response messages. For this reason please make sure
that your printer is likewise only configured unidirectionally. You can make the rele-
vant printer settings for your printer by choosing Start – Settings – Printers.
The print server of the Gigaset SX763 WLAN dsl does not work bidirectionally. It does
not evaluate any of the printer's response messages. For this reason please make sure
that your printer is likewise only configured unidirectionally. You can make the rele-
vant printer settings for your printer by choosing Start – Settings – Printers.