Siemens SX763 User Manual

Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / printer.fm / 08.12.2006

Sc

hablone 2

004_

08_2

6

Once you have installed the printer port you still cannot start printing. The printer port 
is nothing more than an additional interface on your PC, comparable with the USB port. 
It means that any printer you install on this port is also regarded as a local printer even 
though it is located in the network and possibly not directly near you. 
You still need to connect the printer to this port and configure it. 

ì

Connect the printer to the USB port on your Gigaset SX763 WLAN dsl. 

The printer is installed in the same way as any other printer: 

ì

Go through Start – Settings – Printers and click Add Printer.

ì

In the window that opens click Next.

ì

Proceed as instructed by the Add Printer Wizard. Please note: 
In the window in which you are prompted to specify the location of the printer you 
should select Local printer (usually the default setting).

ì

Then click Next.

ì

Continue to install the printer. Select your printer and click Next.

ì

When the window in which you are prompted to enter the type of connection 
appears, double-click the port name Gigaset_printerport.

ì

Then continue to install the printer and finish the installation.

Note:
The print server of the Gigaset SX763 WLAN dsl does not work bidirectionally. It does 
not evaluate any of the printer's response messages. For this reason, please make sure 
that your printer is likewise only configured unidirectionally.