Siemens S323 User Manual

UMN:CLI                                                                                                                                                              User  Manual 

SURPASS hiD 6615 S223/S323 R1.5 

182                                                                         A50010-Y3-C150-2-7619 

  MAC-ADDRESS 

<1-4094> 

Configure VLAN based on MAC address 

 

 

Bridge 

Clears configured VLAN based on MAC address. 

 

In order to configure VLAN based on Subnet, user should designate Subnet. use the fol-
lowing command. 

t  IP-ADDRESS/M <1-

4094> 

Configure VLAN based on Subnet 

{IP-ADDRESS} 

Bridge 

Clears configured VLAN based on Subnet. 

 

To make precedence between MAC address and Subnet based VLAN, user can choose 
one of both with below command. 

  {MAC / SUB-

} 

Bridge 

Configure precedence between MAC based 
VLAN and Subnet based VLAN. 

 

In a VLAN environment, a frame’s association with a given VLAN is soft; the fact that a 
given frame exists on some physical cable does not imply its membership in any particu-
lar VLAN. VLAN association is determined by a set of rules applied to the frames by 
VLAN-aware stations and/or switches. 

There are two methods for identifying the VLAN membership of a given frame: 
•

 

Parse the frame and apply the membership rules (implicit tagging).   

•

 

Provide an explicit VLAN identifier within the frame itself. 

 

A VLAN tag is a predefined field in a frame that carries the VLAN identifier for that frame. 
VLAN tags are always applied by a VLAN –aware device. VLAN-tagging provides a num-
ber of benefits, but also carries some disadvantages.