GarrettCom 6K32FR User Manual

Magnum 6K32F/FR/FC/FRC Managed Switch Installation and User Guide (05/08) 

traffic is not affected by PoE. 

LINK and ACTIVITY LEDS are combined

hat is marked as LINK/ACT, as shown in the diagram

 on the PoE modules into one LED 

. 

t
 
 
 
 
 
 
 
 
 
 

For P

• 

oE devices, each RJ-45 PoE port supports only 802.3af complaint 

devices. The PoE LED is ON when the attached PD is drawing power from th
port. 

e 

• 

For non-PoE devices connected, the PoE port will act as a normal RJ-45 port 
and the PoE LED is OFF.  No power is being sent out from the port. 
The PoE ports in Magnum 6K’s with 48VDC power input act as a pass-
through, so the 48VDC 

• 

power source 

• 

s for some reas

simultaneously to indicate a trouble condition. The ports will still operate 

must be strong enough to provide power 

wer 

on, all the PoE port LEDs are ON 

to the 6K switch and to all the 8 RJ-45 ports with PD devices connected (up to 
15 watts per PoE port). 
In the case where the 48VDC power in not internally connected and no po
is coming to the PoE port

properly for data traffic. 

nd 

he 

distances as mentioned on 5.2.3. and the LEDs also act similarly.  

The Magnum 6KP8-

45-2MT eight port Module is a 

combo module with copper a

fiber (Small Form Factor) 

MTRJ type ports. The small 

sizes of MTRJ connectors give 

an advantage of placing more 

fiber ports on one module. T

6KP8-45-2MT is equipped 

with six 10/100 RJ-45 ports 

and two 100Mb MTRJ fiber 

ports. When installed in a Magnum 6K32F Series Switch, it supports the standard 

 

57 

.

.