GarrettCom 6K32FR User Manual

Magnum 6K32F/FR/FC/FRC Managed Switch Installation and User Guide (05/08) 

 

56 

.

.

informati

the 

roperly to an 803.af compliant PD device on that port. 

When no

on Sec.1.2 for all the various P6K PoE modules option. 

 

The LEDs on 6KP8-RJ45- PoE modules are slightly different compared to 

regular (non-PoE) RJ-45 modules as shown in Fig 2. When the PoE port is in use, 

PoE LED is ON when connected p

n-PoE devices are connected, the PoE LED is OFF. PoE does not affect 

operation of Ethernet data traffic. 

LINK and AC

that i ma

TIVITY LEDS are combined on the PoE modules into one LED 

s 

rked as LINK/ACT, as shown in the diagram. 

For PoE devices, each RJ-45 PoE port supports only 802.3af complaint 

devices

• 

. The PoE LED is ON when the attached PD is drawing power from th

port. 

For non-PoE devices connected, the PoE port will act as a normal RJ-

e 

• 

ports with PD devices connected (up to 

• 

wer 

 to indicate a trouble condition. The ports will still operate 

orts. The 4-RJ45 POE 

modules 

g 

ed properly to an 803.af compliant PD device on that port. 

When no

• 

45 port 

and the PoE LED is OFF.  No power is being sent out from the port. 

The PoE ports in Magnum 6K’s with 48VDC power input act as a pass-

through, so the 48VDC power source must be strong enough to provide power 

to the 6K switch and to all the 8 RJ-45 

15 watts per PoE port). 

In the case where the 48VDC power in not internally connected and no po

is coming to the PoE ports for some reason, all the PoE port LEDs are ON 

simultaneously

properly for data traffic. 

The PoE RJ-45 ports act similar to regular RJ-45 ports, except they have the 

capability of providing power on each port to power up the PD devices, per the 

IEEE802.3af PoE standard. Only 4 x RJ-45 (10/100) ports max. support POE (Power 

Inside) option in one 6K-unit. In this Fig. the top 4-RJ45 ports are enhanced with the 

POE option whereas the bottom 4- RJ-45 ports are normal MDIX p

are also available with mix –n-match fiber modules. Please check the orderin

information Sec.1.2. for all the various PI6K PoE module options. 

The LEDs on 6KP8-RJ45- PoE modules are slightly different compared to 

regular (non-PoE) RJ-45 modules as shown in Fig 2. When the PoE port is in use, the 

PoE LED is ON when connect

n-PoE devices are connected, the PoE LED is OFF. Operation of Ethernet data