GarrettCom DX40 User Manual

2 - Installation

Installation of the DX40 Unit

DX40 Serial Device Router Installation Guide

13

To install an SFP in port E1 or E2:

1. Slide the SFP into the Ethernet port until it is firmly seated.

2. Attach the protective cap to avoid contamination until you are ready to attach 

cable.

To install the DX40 you must first 

•

Mount it

•

Make the ground and power connections.

•

Connect the network cables

Your DX40 shipment includes the mounting hardware you have ordered as appropriate to 
your site.This hardware is one of:

•

A pair of 2” brackets for mounting on a panel.

•

A DIN rail mounting bracket permanently attached to the chassis.

Each bracket for mounting on a panel is attached with two screws to the rear surface of 
the DX40. 

 illustrates the DX40 with panel mounting brackets in place.

Figure 2-2. DX40 configured for Panel Mounting

2.625in
(6.668cm)

0.51in
(1.3cm)

0.51in
(1.3cm)

6.15in
(15.62cm)

2.625in
(6.668cm)