GarrettCom DX40 Manuel D’Utilisation
C
HAPTER
2 - Installation
Installation of the DX40 Unit
DX40 Serial Device Router Installation Guide
13
To install an SFP in port E1 or E2:
1. Slide the SFP into the Ethernet port until it is firmly seated.
2. Attach the protective cap to avoid contamination until you are ready to attach
cable.
2.3
Installation of the DX40 Unit
To install the DX40 you must first
•
Mount it
•
Make the ground and power connections.
•
Connect the network cables
2.3.1
Mounting
Your DX40 shipment includes the mounting hardware you have ordered as appropriate to
your site.This hardware is one of:
your site.This hardware is one of:
•
A pair of 2” brackets for mounting on a panel.
•
A DIN rail mounting bracket permanently attached to the chassis.
2.3.1.1
Mounting on a Panel
illustrates the DX40 with panel mounting brackets in place.
Figure 2-2. DX40 configured for Panel Mounting
2.625in
(6.668cm)
(6.668cm)
0.51in
(1.3cm)
(1.3cm)
0.51in
(1.3cm)
(1.3cm)
6.15in
(15.62cm)
(15.62cm)
2.625in
(6.668cm)
(6.668cm)