TP-LINK TD-W8970 User Manual
TD-W8970
300Mbps Wireless N Gigabit ADSL2+ Modem Router User Guide
Figure 4-59
2. Enter the following data:
Destination IP Address: The address of the network or host that you want to assign to a
static route.
Subnet Mask: It determines which portion of an IP Address is the network portion, and
which portion is the host portion.
Gateway: Type in the correct gateway address for the static route.
Interface: Select the Interface from the drop-down list.
Status: Select Enabled or Disabled from the drop-down list.
3. Click
Save to save your settings.
To modify or delete an existing entry:
1
Find the desired entry in the table.
2
Click
Edit as desired on the Edit column.
Click the
Enable/ Disabled Selected button to make selected entries enabled/ disabled.
Click the
Delete Selected button to delete selected entries.
4.11.3 RIP Settings
Choose “
Route Settings”“RIP Settings”, you can see the RIP (Routing Information Protocol)
screen which allows you to configure the RIP.
Figure 4-60
Note:
RIP cannot be configured on the WAN Interface which has NAT enabled (such as PPPoE).
61