TP-LINK TD-W8970 User Manual
![TP-LINK](https://files.manualsbrain.com/attachments/4d45e1da28d82d97a14cc52b904d065832fadc3e/common/fit/150/50/19c41f2620d27a16e36b513f2e907691223c5e6ec2f2f5e9ece0de10684a/brand_logo.png)
TD-W8970
300Mbps Wireless N Gigabit ADSL2+ Modem Router User Guide
4.11 Route Settings
Choose “
Route Settings”, it includes three menus: Default Gateway, Static Route and RIP
Settings. The detailed descriptions are provided below.
4.11.1 Default Gateway
Choose “
Route Settings”“Default Gateway”, you can see the Default Gateway screen. You
can select a WAN Interface from the drop-down list as the system default gateway.
Figure 4-57
Click the
Add Interface button, you can add WAN Interfaces.
Click the
Save button to save your settings.
4.11.2 Static Route
Choose “
Route Settings” “Static Route”. You can see the Static Route screen, this screen
allows you to configure the static routes (shown in Figure 4-58). A static route is a pre-determined
path that network information must travel to reach a specific host or network.
Figure 4-58
To add static routing entries:
1. Click the
1. Click the
Add New button in Figure 4-58, and you will see the screen as shown in Figure
60