TP-LINK TD-W8970 User Manual
TD-W8970
300Mbps Wireless N Gigabit ADSL2+ Modem Router User Guide
4.12 IPv6 Route Settings
Choose “
IPv6 Route Settings”, it includes two menus: IPv6 Default Gateway and IPv6 Static
Route. The detailed descriptions are provided below.
4.12.1 IPv6 Default Gateway
Choose “
IPv6 Route Settings”“IPv6 Default Gateway”, you can see the Default Gateway
screen. You can select a WAN Interface from the drop-down list as the system default gateway.
Figure 4-61
Click the
Add Interface button, you can add WAN Interfaces.
Click the
Save button to save your settings.
4.12.2 IPv6 Static Route
Choose “
IPv6 Route Settings” “IPv6 Static Route”. You can see the IPv6 Static Route screen.
This screen allows you to configure the IPv6 static routes (shown in Figure 4-62). An IPv6 static
route is a pre-determined path that network information must travel to reach a specific host or
network.
Figure 4-62
To add a new entry, follow the instructions below.
1. Click the
1. Click the
Add New button in Figure 4-62, and you will see the screen as shown in Figure
62