ZyXEL Communications 782R User Manual
Prestige 782R G.SHDSL Router
Remote Node Configuration
4-7
The next table explains TCP/IP-related fields in Menu 11.3
–
Remote Node Network Layer Options.
Table 4-4 Remote Node TCP/IP Configuration
FIELD
DESCRIPTION
OPTIONS
Rem IP Addr
This is the IP address you entered in the previous menu.
Rem Subnet
Mask
Mask
Type the subnet mask assigned to the remote node.
My WAN Addr
Some implementations, especially UNIX derivatives, require separate
IP network numbers for the WAN and LAN links and each end to have a
unique address within the WAN network number. In that case, type the
IP address assigned to the WAN port of your Prestige.
IP network numbers for the WAN and LAN links and each end to have a
unique address within the WAN network number. In that case, type the
IP address assigned to the WAN port of your Prestige.
NOTE: This is your local Prestige address, not the remote router’s.
Single User
Account
Account
Use [SPACE BAR] to toggle between Yes and No. Yes enables the
Single User Account feature of your Prestige.
Single User Account feature of your Prestige.
Yes/No
Metric
The metric represents the “cost” of transmission for routing purposes.
IP routing uses hop count as the cost measurement, with a minimum of
1 for directly connected networks. Type a number that approximates the
cost for this link. The number need not be precise, but it must be
between 1 and 15. In practice, 2 or 3 is usually a good number.
IP routing uses hop count as the cost measurement, with a minimum of
1 for directly connected networks. Type a number that approximates the
cost for this link. The number need not be precise, but it must be
between 1 and 15. In practice, 2 or 3 is usually a good number.
1 to 15
Private
This determines if the Prestige will include the route to this remote node
in its RIP broadcasts. If set to Yes, this route is kept private and not
included in RIP broadcast. If No, the route to this remote node will be
propagated to other hosts through RIP broadcasts.
in its RIP broadcasts. If set to Yes, this route is kept private and not
included in RIP broadcast. If No, the route to this remote node will be
propagated to other hosts through RIP broadcasts.
Yes/No
RIP Direction
Press [SPACE BAR] to select the RIP Direction from Both/In Only/Out
Only and None.
Only and None.
Both/None/
In Only/ Out
Only
In Only/ Out
Only
Version
Press [SPACE BAR] to select the RIP version from RIP-1/RIP-2B/RIP-
2M.
2M.
RIP-1 /
RIP-2B / RIP-
2M
RIP-2B / RIP-
2M
Multicast
Sets IGMP to version 1, version 2, or disables IGMP.
IGMP-v1/
IGMP-v2/
None
IGMP-v2/
None
IP Policies
You can apply up to four IP Policy sets (from twelve) by typing in their
numbers separated by commas.
numbers separated by commas.
3, 4, 5, 6
When you have completed this menu, press [ENTER] at the prompt “Press [ENTER] to confirm or [ESC] to
cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.
cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.