ZyXEL Communications X6004 User Manual
Chapter 3 Tutorials
X6004 User’s Guide
48
Figure 21 Configuration > PBX > Server Configuration > Auto Provision > Edit
3 The serial number of the softphone that is to use the SIP extension displays in the
summary screen.
Figure 22 Configuration > PBX > Server Configuration > Auto Provision
4 Repeat these steps to map each SIP extension to a SIP device’s MAC address or serial
number.
3.1.4.1 Configuring the IP Phones for Auto Provisioning
Configure the ZyXEL IP phones to receive configuration information from the X6004. This
typically involves enabling auto provisioning and specifying the protocol to use (HTTP at the
time of writing). See the documentation that came with your ZyXEL IP phone for information
on how to do this.
Once the IP phones receive their configuration information via auto provisioning, they will
automatically register with the X6004. You can make internal calls by dialing the extension
number assigned to each phone.
typically involves enabling auto provisioning and specifying the protocol to use (HTTP at the
time of writing). See the documentation that came with your ZyXEL IP phone for information
on how to do this.
Once the IP phones receive their configuration information via auto provisioning, they will
automatically register with the X6004. You can make internal calls by dialing the extension
number assigned to each phone.