ZyXEL Communications X6004 User Manual

 Chapter 3 Tutorials

X6004 User’s Guide

The following section shows you how to make and receive calls via a connection to the PSTN. 
This example covers:

 - configuring the outbound line group (connection settings) from 

the FXO interface card to the PSTN.

 - creating a rule which tells the X6004 when to use the PSTN 

connection when completing outbound calls.

 - giving extensions the right to make outbound 

calls via the PSTN connection. 

Figure 23   Making a PSTN Call

This example assumes that the X6004 has an FXO interface card already installed (refer to the 
Quick Start Guide) and that you have connected your telephone cables to the outlets that 
connect to your local telephone company. The front of your X6004 should look as shown in 
the following figure. 

"

Note that the FXO interface card is installed in slot B and ports 1-4 are used 
for the connections. You will use this information in a web configurator screen.  

Figure 24   FXO Interface Card Connection

Caller dials 
05555555

The X6004

matches this number 

with an LCR, applies an 

offset (strips off the 0)

and routes the call to 
PSTN.

B

D