Xerox 3315/DN User Manual

Loading Paper

Xerox WorkCentre 3315DN/3325DN/3325DNI

User Guide

19

3.

Position the side guide by squeezing the lever and sliding 
it towards the stack of paper, until it gently touches the 
side of the stack.

4.

Insert the paper tray into the machine.

5.

After loading paper in the paper tray, set the paper size 
and type using the control panel. Press OK to confirm the 
settings or Stop to change the settings. These settings 
will apply to Copy and Fax modes.

6.

When printing from your computer, ensure you press the 
Select Paper button to specify the correct paper size, 
color and type. Not confirming the paper details may 
result in printing delays. For information about setting 
the paper type and size on the control panel, refer to 

Note:

The settings made from the printer driver on your computer override the settings on the 

.

For more information on loading paper, refer to 

Bypass Tray

The bypass tray is located on the front of your machine. It can be closed when not in use, making the 
product more compact. Use the bypass tray to print transparencies, labels, envelopes or postcards in 
addition to making quick runs of paper types or sizes that are not currently loaded in the main paper 
tray.

The bypass tray can hold a maximum of 50 sheets of 20 lb (80 g/m²) bond paper, 5 transparency 
sheets or 5 envelopes.

1.

Lower the bypass tray 

and unfold the paper support 

extension

.

2.

Prepare a stack of paper for loading by flexing or fanning 
it back and forth. Straighten the edges on a level surface. 
Remove any curl on postcards, envelopes and labels 
before loading them into the bypass tray. 

When using the bypass tray for special media it may be 
necessary to use the rear door for the output. For further 
information refer to 

3.

Load the print material between the width guides with 
the print side facing up.

Note:

Hold transparencies by the edges and avoid 

touching the print side.