Xerox 3315/DN User Manual
Loading Paper
Xerox WorkCentre 3315DN/3325DN/3325DNI
User Guide
User Guide
20
4.
Adjust the paper guide to the width of the stack of print
material. Ensure you have not loaded too much print
media. The stack should be below the Maximum Fill line
indicated by the symbol
material. Ensure you have not loaded too much print
media. The stack should be below the Maximum Fill line
indicated by the symbol
.
5.
When printing from your computer, ensure you press the
Select Paper button to specify the correct paper size,
color and type. Not confirming the paper details may
result in printing delays. For information about setting
the paper type and size on the control panel, refer to
Select Paper button to specify the correct paper size,
color and type. Not confirming the paper details may
result in printing delays. For information about setting
the paper type and size on the control panel, refer to
Note:
The settings made from the printer driver on your
computer override the settings on the control panel.
6.
After printing, remove any unfed paper and close the
bypass tray
bypass tray
.
Duplex Unit
The duplex unit is preset to either Letter size or A4 depending on your country. To change the size of
the duplex unit, follow the instructions below.
the duplex unit, follow the instructions below.
1.
Pull the duplex unit out of the machine.
2.
Adjust the guides to match the size of paper you will be
using.
using.
A4