Panasonic KX-P8415 User Manual
7
To avoid machine malfunction, do not use the equipment under the following conditions:
B
Liquids near the equipment
B
Unstable or unlevel surfaces
B
Directly in front of air
conditioning vents
conditioning vents
Cautions
B
Direct exposure to sunlight
B
Extremely high or low temperature
[temperature range: 10˚C to 32.5˚C
(50˚F to 90.5˚F)]
[temperature range: 10˚C to 32.5˚C
(50˚F to 90.5˚F)]
B
Extremely high or low humidity
(humidity range: 20% to 80% RH)
(humidity range: 20% to 80% RH)
B
Condensation due to rapid change
of temperature
of temperature
B
Areas of poor ventilation
B
Areas of high dust or chemical
fume concentration (solvent etc.)
fume concentration (solvent etc.)
B
Too much media/document
which exceeds the limit mark
( ) on the guide of the tray.
which exceeds the limit mark
( ) on the guide of the tray.
B
Any toner other than genuine
Panasonic toner; it may
damage the printer.
Panasonic toner; it may
damage the printer.
Not genuine toner
B
Do not use a media for ink jet
(paper, transparency, etc.) that
may be wrapped around the
fuser roller and cause damage.
(paper, transparency, etc.) that
may be wrapped around the
fuser roller and cause damage.
Ink jet
media
■
Static Electricity Damage
To prevent static electricity damage to any of the following components, touch a grounded metal surface,
such as the printer’s bare metal frame prior to touching the component.
such as the printer’s bare metal frame prior to touching the component.
B
The interface connectors : parallel and optional network
B
Electrical components, connectors inside the printer and any components on the optional board (RAM
Expansion Board or Ethernet Card)
Expansion Board or Ethernet Card)
B
The connector pins on the optional 2nd cassette feeder or auto duplex printing unit for the printer
■
Interface Cable
Always use a shielded interface cable. Use of an unshielded cable can result in radio interference with data.
Before
You
Start
Setup
Guide