Lexmark MX310dn User Manual
Action
Yes
No
Step 7
Increase the scan resolution settings for a higher
‑quality output.
Did the increased resolution produce a higher
‑quality output?
Problem solved.
Contact
.
Partial document or photo scans
Action
Yes
No
Check the placement of the document or photo.
Make sure the document or photo is loaded facedown on the scanner
glass in the upper left corner.
glass in the upper left corner.
Is the document or photo loaded correctly?
Contact
.
Load the document or
photo facedown on the
scanner glass in the
upper left corner.
photo facedown on the
scanner glass in the
upper left corner.
Embedded Web Server does not open
Action
Yes
No
Step 1
a
Turn on the printer.
b
Open a Web browser, and then type the printer IP address.
c
Press Enter.
Does the Embedded Web Server open?
The problem is solved. Go to step 2.
Step 2
Make sure the printer IP address is correct.
a
View the printer IP address:
•
From the TCP/IP section in the Network/Ports menu
•
By printing a network setup page or menu settings page, and then
finding the TCP/IP section
finding the TCP/IP section
Note: An IP address appears as four sets of numbers separated
by periods, such as 123.123.123.123.
by periods, such as 123.123.123.123.
b
Open a Web browser, and then type the IP address.
Note: Depending on the network settings, you may need to type
“https://” instead of “http://” before the printer IP address
to access the Embedded Web Server.
“https://” instead of “http://” before the printer IP address
to access the Embedded Web Server.
c
Press Enter.
Does the Embedded Web Server open?
The problem is solved. Go to step 3.
Troubleshooting
240