Lexmark 26C0235 User Manual

On
Off

Sets the printer to automatically switch to PS emulation when a print job requires
it, regardless of the default printer language

On is the factory default setting.

When the Off setting is used, the printer does not examine incoming data.

When the Off setting is used, the printer uses PCL emulation if PCL
SmartSwitch is set to On. It uses the default printer language specified in the
Setup menu if PCL SmartSwitch is set to Off.

Off
Auto

Sets the printer to perform the special processing required for bidirectional
communication following the conventions defined by the NPA protocol

Auto is the factory default setting

Changing this setting from the printer control panel and then exiting the
menus causes the printer to restart. The menu selection is updated.

Disabled
Auto

Sets the size of the network input buffer

Auto is the factory default setting.

The value can be changed in 1

‑K increments.

The maximum size allowed depends on the amount of memory in the printer,
the size of the other link buffers, and whether Resource Save is set to On or
Off.

To increase the maximum size range for the Network Buffer, disable or
reduce the size of the USB buffer.

Changing this setting from the printer control panel and then exiting the
menus causes the printer to restart. The menu selection is updated.

On
Off
Auto

Sets the printer to process Macintosh binary PostScript print jobs

Auto is the factory default setting.

The Off setting filters print jobs using the standard protocol.

The On setting processes raw binary PostScript print jobs.

Reports Menu
Network Card menu
TCIP Menu
IPv6 Menu
Wireless menu
AppleTalk menu

Lists all the network setup menus, regardless of the active network of the printer

Note: Certain options are not available on selected printer models.

Understanding printer menus

133