Sanyo E11A202U User Manual

− 25 −

Two beeps sound from the buzzer.

The setting is saved and the UPS

returns to normal operation.

10.2 Setup Menu Operations

Set all menu items with the following procedure.
This example shows how to set the “UPS operation mode” item to “Economy”.

①

With MAIN MCCB on the back panel set to “ON”, check that the green

INV.ON/STAND BY indicator and the green OUTPUT indicators are not blinking.

②

Press

and hold it for at least 3 seconds.

③

Select the menu item to set by using the 5 LEDs surrounded by in the following

figure.
Press and quickly release

(within 3 seconds) so that a menu item selection LED

blinks. Each press makes a different LED or set of LEDs blink. Keep pressing until you
have selected the menu item you want to set.

④

Select the value to set by using the 4 LEDs surrounded by in the following figure.

Press and quickly release

(within 3 seconds) so that a setting value LED blinks.

Each press makes a different LED or set of LEDs blink. Keep pressing until you have
selected the value you want to set.

⑤

When you are finished making settings, press

and hold it for at least 3 seconds.

Notice

If you keep pressing for 3 more seconds,

2 beeps will sound again and all settings

will return to the default setting.
However “② Output voltage” setting
will return to 120V, not defult.

“⑬Battery backup time” and ”⑭Battery
type ” settimg will not return to the

default setting.

Hold for 3 seconds.

Buzzer : 2 beeps

2 LEDs

blink.

LEDs that blink when the “UPS operation mode”

menu item is selected

Menu item

Blinking LEDs

UPS operation mode

●

○ ○ ○ ○

See the list in the previous section for the LED

patterns to select other menu items.

Short press

LEDs that blink when the “Economy” setting is

selected.

Setting

Blinking LEDs

Auto

●

○ ○ ○

Double Conversion

○

● ○ ○

Economy

●

● ○ ○

See the list in the previous section for the LED

setting patterns of other menu items.

Example

Short press

Hold for 3 seconds.