Intel 1000LX User Manual
GB2.book : GB203 10 Tue Oct 27 13:01:06 1998
C H A P T E R 3
Configure the module and connect the cables
10
Configuring the Module
To change the module
mode using Intel Device
View
mode using Intel Device
View
The default setting for the Module Mode is Stack Mode. With the
switch containing the 1000Base Module displayed in the Device
View window:
switch containing the 1000Base Module displayed in the Device
View window:
Warning
Changing mode causes Intel Device View to save the
switch configuration and reset the switch.
switch configuration and reset the switch.
1
Right-click the 1000Base-SX/1000Base-LX port on the module
and select
and select
Port Setup
.
2
Click the
Module
tab.
3
Select the correct mode.
4
Click
OK
. The configuration is saved and the switch reset.
To change the port
settings using Intel
Device View
settings using Intel
Device View
The 1000Base Module default port settings are — Port Enabled,
Spanning Tree Disabled and Auto-negotiation Enabled. To change
these settings:
Spanning Tree Disabled and Auto-negotiation Enabled. To change
these settings:
1
Right-click the 1000Base-SX/1000Base-LX port on the module
and select
and select
Port Setup
.
2
Click the
Port Mode
tab.
3
Set the port settings.
4
Click
OK
.