Intel 1000LX User Manual
GB2.book : GB203 12 Tue Oct 27 13:01:06 1998
C H A P T E R 3
Configure the module and connect the cables
12
Stack Mode
Cabling to a Matrix
Module in a group of
switches
Module in a group of
switches
The 1000Base Module is installed in a different switch from the Ma-
trix Module, so the cabling process is in two parts; the switch contain-
ing the 1000Base Module must be connected to the group, then the
high-speed link between this group and another group or device is es-
tablished.
trix Module, so the cabling process is in two parts; the switch contain-
ing the 1000Base Module must be connected to the group, then the
high-speed link between this group and another group or device is es-
tablished.
1
Plug the Stacking Cable (Intel Order Code: ES500SC) into the
Stack Interface Module connector on the 1000Base Module,
and secure it using the latches on the connector.
Stack Interface Module connector on the 1000Base Module,
and secure it using the latches on the connector.
2
Plug the other end of the Stacking Cable into the Matrix Mod-
ule, and secure it using the latches on the connector.
ule, and secure it using the latches on the connector.
3
Plug a second Stacking Cable into the 1000Base-SX/1000Base-
LX SIM connector on the 1000Base Module, and secure it
using the latches on the connector.
LX SIM connector on the 1000Base Module, and secure it
using the latches on the connector.
4
Plug the other end of the Stacking Cable in to the Matrix Mod-
ule, and secure it using the latches on the connector.
ule, and secure it using the latches on the connector.
1000Base-SX
Stack Interface Module
CLASS 1 LASER PRODUCT
1000SX Module for 500 Series Switches
1717
1000Base-SX
Stack Interface Module
CLASS 1 LASER PRODUCT
1000SX Module for 500 Series Switches
1718