DELL PC6224F User Manual

Management ACL Commands

Use the management access-list command in Global Configuration mode to 

define an access list for management, and enter the access-list for 

configuration. Once in the access-list configuration mode, the denied or 

permitted access conditions are configured with the deny and permit 

commands. To remove an access list, use the no form of this command. 

management access-list 

name

no management access-list 

name

•

name — The access list name. (Range: 1–32 characters)

This command has no default configuration.

Global Configuration mode

This command enters the access-list configuration mode, where the denied or 

permitted access conditions with the deny and permit commands must be 

defined.
If no match criteria are defined the default is deny.
If reentering to an access-list context, the new rules are entered at the end of 

the access-list.
Use the management access-class command to select the active access-list.
The active management list cannot be updated or removed.

The following example shows how to configure two management interfaces, 

Ethernet 1/g1 and Ethernet 2/g9.

console(config)#management access-list mlist