DELL PC6224F User Manual

Management ACL Commands

console(config-macal)# permit ethernet 1/g1 priority 

<1-64>

console(config-macal)# permit ethernet 2/g9 priority 

<1-64>

console(config-macal)# exit

console(config)#management access-class mlist

The following example shows how to configure all the interfaces to be 

management interfaces except for two interfaces, Ethernet 1/g1 and Ethernet 

2/g9.

console(config)# management access-list mlist

console(config-macal)# deny ethernet 1/g1 priority 

<1-64>

console(config-macal)# deny ethernet 2/g9 priority 

<1-64>

console(config-macal)# permit priority <1-64>

console(config-macal)# exit

console(config) # management access-class mlist

Use the permit command in Management Access-List configuration mode to 

set conditions for the management access list. 

permit ip-source 

ip-address [mask mask | prefix-length] [ethernet interface-

number | vlan vlan-id |port-channel number] [service service] [priority 

priority-value]
permit {ethernet 

interface-number | vlan vlan-id | port-channel number} 

[service 

service] [priority priority-value]

permit service 

service [priority priority-value]

permit priority 

priority-value

• ethernet 

interface-number — A valid routed port number.