DELL 9.8(0.0) User Manual
mode
To receive or transmit, set LLDP.
S4820T
Syntax
mode {tx | rx}
To return to the default, use the no mode {tx | rx} command.
To return to the default, use the no mode {tx | rx} command.
Parameters
tx
Enter the keyword tx to set the mode to transmit.
rx
Enter the keyword rx to set the mode to receive.
Defaults
Both transmit and receive.
Command
Modes
Modes
CONFIGURATION (conf-lldp) and INTERFACE (conf-if-interface-lldp)
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.7.1.0
Introduced on the S-Series.
7.6.1.0
Introduced on the C-Series.
7.4.1.0
Introduced on the E-Series.
Related
Commands
Commands
— enables LLDP globally.
— displays the LLDP neighbors.
1154
Link Layer Discovery Protocol (LLDP)