DELL 9.8(0.0) User Manual
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
9.2(1.0)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.5.1.0
Added support for 4-port 40G line cards on ExaScale.
8.3.7.0
Introduced on the S4810.
7.8.1.0
Introduced on the S-Series.
7.6.1.0
Introduced on the C-Series.
pre- 6.2.1.1
Introduced on the E-Series.
Usage
Information
Information
When the offset metric is applied to an interface, that value takes precedence over
an offset value that is not extended to an interface.
an offset value that is not extended to an interface.
Related
Commands
Commands
output-delay
Set the interpacket delay of successive packets to the same neighbor.
S4820T
Syntax
output-delay delay
To return to the switch software defaults for interpacket delay, use the no
output-delay command.
To return to the switch software defaults for interpacket delay, use the no
output-delay command.
Parameters
delay
Specify a number of milliseconds as the delay interval. The
range is from 8 to 50.
range is from 8 to 50.
Defaults
Not configured.
Command
Modes
Modes
ROUTER RIP
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
1528
Routing Information Protocol (RIP)