ZyXEL Communications XGS-4526 User Manual

 Chapter 8 Basic Setting

XGS-4526/4528F/4728F User’s Guide

Switch in a routing domain, simply add a new routing domain entry with a 
different IP address in the same subnet. 

Figure 35   Basic Setting > IP Setup

The following table describes the labels in this screen. 

Table 13   Basic Setting > IP Setup 

Default 
Gateway

Type the IP address of the default outgoing gateway in dotted decimal 
notation, for example 192.168.1.254.

Domain 
Name Server

DNS (Domain Name System) is for mapping a domain name to its 
corresponding IP address and vice versa. Enter a domain name server IP 
address in order to be able to use a domain name instead of an IP address.

Default 
Management

Specify which traffic flow (In-Band or Out-of-band) the Switch is to send 
packets originating from itself (such as SNMP traps) or packets with 
unknown source. 

Select Out-of-band to have the Switch send the packets to the 
management port labelled MGMT. This means that device(s) connected to 
the other port(s) do not receive these packets. 

Select In-Band to have the Switch send the packets to all ports except the 
management port (labelled MGMT) to which connected device(s) do not 
receive these packets. 

Management IP Address

Use these fields to set the settings for the out-of-band management port.