ZyXEL Communications XGS-4526 User Manual
Chapter 8 Basic Setting
XGS-4526/4528F/4728F User’s Guide
112
IP
Address
Enter the out-of-band management IP address of your Switch in dotted
decimal notation. For example, 192.168.0.1.
decimal notation. For example, 192.168.0.1.
IP Subnet
Mask
Enter the IP subnet mask of your Switch in dotted decimal notation, for
example, 255.255.255.0.
example, 255.255.255.0.
Default
Gateway
Enter the IP address of the default outgoing gateway in dotted decimal
notation, for example, 192.168.0.254
notation, for example, 192.168.0.254
Apply
Click Apply to save your changes to the Switch’s run-time memory. The
Switch loses these changes if it is turned off or loses power, so use the
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Switch loses these changes if it is turned off or loses power, so use the
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Cancel
Click Cancel to reset the fields to your previous configuration.
IP Interface
Use these fields to create or edit IP routing domains on the Switch.
IP
Address
Enter the IP address of your Switch in dotted decimal notation, for
example, 192.168.1.1. This is the IP address of the Switch in an IP routing
domain.
example, 192.168.1.1. This is the IP address of the Switch in an IP routing
domain.
IP Subnet
Mask
Enter the IP subnet mask of an IP routing domain in dotted decimal
notation, for example, 255.255.255.0.
notation, for example, 255.255.255.0.
VID
Enter the VLAN identification number to which an IP routing domain
belongs.
belongs.
Add
Click Add to save your changes to the Switch’s run-time memory. The
Switch loses these changes if it is turned off or loses power, so use the
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Switch loses these changes if it is turned off or loses power, so use the
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Cancel
Click Cancel to reset the fields to your previous configuration.
Index
This field displays the index number of an entry.
IP Address
This field displays IP address of the Switch in the IP domain.
IP Subnet
Mask
Mask
This field displays the subnet mask of the Switch in the IP domain.
VID
This field displays the VLAN identification number of the IP domain on the
Switch.
Switch.
Delete
Click Delete to remove the selected entry from the summary table.
Note: Deleting all IP subnets locks you out of the Switch.
Cancel Click
Cancel to clear the Delete check boxes.
Table 13 Basic Setting > IP Setup (continued)
LABEL
DESCRIPTION