ZyXEL Communications XGS-4526 User Manual

 Chapter 8 Basic Setting

XGS-4526/4528F/4728F User’s Guide

Use this screen to configure Switch port settings. Click Basic Setting > Port 
Setup in the navigation panel to display the configuration screen. 

Figure 36   Basic Setting > Port Setup 

The following table describes the labels in this screen. 

Table 14   Basic Setting > Port Setup 

Port

This is the port index number. 

*

Settings in this row apply to all ports.

Use this row only if you want to make some settings the same for all ports. 
Use this row first to set the common settings and then make adjustments 
on a port-by-port basis. 

Note: Changes in this row are copied to all the ports as soon as you 

make them.

Active

Select this check box to enable a port. The factory default for all ports is 
enabled. A port must be enabled for data transmission to occur.

Name

Type a descriptive name that identifies this port. You can enter up to 64 
alpha-numerical characters. 

Note: Due to space limitations, the port name may be truncated in 

some web configurator screens. 

Type

This field displays 10/100/1000M for a 1000Base-T connection, 10G for 
a 10 Gigabit Ethernet connection, and 12G for a 10GBase-CX4 connection 
in the XGS-4528F or XGS-4728F.