Allied Telesis x900-48FE-N User Manual

Page 26 | AlliedWare™ OS How To Note: EPSR

This example is the same as 

 except that one of the 

three switches is an iMAP. We used an AT-TN7100 iMAP running 6.1.10. The ring ports on 
the iMAP are 5.0 and 5.1. The example first shows the configuration script for the iMAP as 
the master node, then as the transit node. For the configuration of the other two switches, 
see Example 1.

The following diagram shows a partial script for the iMAP, with the commands for configuring 
it as a EPSR master node and other relevant commands.

ADD IP INTERFACE=MGMT IPADDRESS=172.28.9.3 SUBNETMASK=255.255.255.0

CARD=ACTCFC GATEWAY=172.28.9.1

#

SET SWITCH AGEINGTIMER=300

#

SET SYSTEM PROVMODE=AUTO

SET SYSTEM GATEWAY=172.28.9.1

#

CREATE EPSR=test MASTER HELLOTIME=1 FAILOVERTIME=2 RINGFLAPTIME=0

#

CREATE VLAN=vlan2 VID=2 FORWARDINGMODE=STD

CREATE VLAN=vlan1000 VID=1000 FORWARDINGMODE=STD

#

ADD VLAN=2 INTERFACE=ETH:[5.0-1] FRAME=TAGGED

ADD VLAN=1000 INTERFACE=ETH:[5.0-1] FRAME=TAGGED

#

DELETE VLAN=1 INTERFACE=ETH:[5.0-1]

#

SET INTERFACE=ETH:[5.0-1] ACCEPTABLE=VLAN

#

ADD EPSR=test INTERFACE=ETH:[5.0] TYPE=PRIMARY

ADD EPSR=test INTERFACE=ETH:[5.1] TYPE=SECONDARY

ADD EPSR=test VLAN=1000 TYPE=CONTROL

ADD EPSR=test VLAN=2 TYPE=DATA

#

ENABLE EPSR=test