Allied Telesis x900-48FE-N User Manual

Page 27 | AlliedWare™ OS How To Note: EPSR

To see a summary, use the command:

show epsr

The following diagram shows the expected output.

To see details, use the command:

show epsr=test 

The following diagram shows the expected output.

--- EPSR Domain Information ---------------------------------------------------

   EPSR Domain   Node Type Domain Status/  Control Interface(s) (PhysicalState,

                                State        Vlan          Type, State)

 --------------- --------- --------------- ------- ----------------------------

 test             MASTER     EN/COMPLETE    1000   5.0 (UP,DNSTRM,FWDING ),

                                                   5.1 (UP,DNSTRM,BLOCKED)

-------------------------------------------------------------------------------

--- EPSR Domain Information ---------------------------------------------------

 EPSR Domain Name...................... test

 EPSR Domain Node Type................. Master

 EPSR Domain State..................... COMPLETE

 MAC Address of Master Node............ 00:00:CD:28:06:19

 EPSR Domain Status.................... Enabled

 Control Vlan.......................... 1000

 Primary Interface..................... 5.0

 Physical State of Primary Interface... UP

 Primary Interface Type................ DOWNSTREAM

 Primary Interface State............... FORWARDING

 Secondary Interface................... 5.1

 Physical State of Secondary Interface. UP

 Secondary Interface Type.............. DOWNSTREAM

 Secondary Interface State............. BLOCKED

 Hello Timer (seconds.................. 1

 Failover Timer (seconds).............. 2

 RingFlap Timer (seconds).............. 0

 Hello Time Remaining (seconds)........ 1

 Failover Time Remaining (seconds)..... 0

 RingFlap Time Remaining (seconds)..... 0

 Hello Sequence........................ 526

 Data Vlans............................ 2

-------------------------------------------------------------------------------