Allied Telesis x900-48FE-N User Manual

Page 28 | AlliedWare™ OS How To Note: EPSR

The following diagram shows a partial script for the iMAP, with the commands for configuring 
it as a transit node.

To see a summary, use the command:

show epsr

The following diagram shows the expected output.

CREATE EPSR=test TRANSIT

#

CREATE VLAN=vlan2 VID=2 FORWARDINGMODE=STD

CREATE VLAN=vlan1000 VID=1000 FORWARDINGMODE=STD

#

DISABLE INTERFACE=0.0-0.15,1.0-1.15,2.0-2.15,4.0-4.1,5.0-5.1

#

ADD VLAN=2 INTERFACE=ETH:[5.0-1] FRAME=TAGGED

ADD VLAN=1000 INTERFACE=ETH:[5.0-1] FRAME=TAGGED

#

DELETE VLAN=1 INTERFACE=ETH:[5.0-1]

#

SET INTERFACE=0.0-0.15,1.0-1.15,2.0-2.15,4.0-4.1,5.0-5.1 

PROFILE=AutoProv

SET INTERFACE=ETH:[5.0-1] ACCEPTABLE=VLAN

#

ADD EPSR=test INTERFACE=ETH:[5.0-1]

ADD EPSR=test VLAN=1000 TYPE=CONTROL

ADD EPSR=test VLAN=2 TYPE=DATA

#

ENABLE EPSR=test

#

ENABLE INTERFACE=0.0-0.15,1.0-1.15,2.0-2.15,4.0-4.1,5.0-5.1

--- EPSR Domain Information ---------------------------------------------------

   EPSR Domain   Node Type Domain Status/  Control Interface(s) (PhysicalState,

                                State        Vlan          Type, State)

 --------------- --------- --------------- ------- ----------------------------

 test             TRANSIT    EN/LINKS-UP    1000   5.0 (UP,UPSTRM,FWDING ),

                                                   5.1 (UP,DNSTRM,FWDING )

-------------------------------------------------------------------------------