Silex Technology SX-500-1402 User Manual
Parameter
Description
Settings
Default Setting
number (required for E-Cable UDP
mode only)
mode only)
Ectmmsec
Cable connection time resolution
Enable, Disable
Disable
Ecudp
ECable UDP mode
Enable, Disable
Disable
Restoring Factory Default Settings
The factory default settings can be restored at any time To do this, hold down the Reset pushbutton for
more than five seconds.
more than five seconds.
Modifying TCP/IP Settings
You can modify the TCP/IP settings using the web browser interface or the Serial Device Server Serial
Device Server’s internal configuration console.
Device Server’s internal configuration console.
To modify TCP/IP settings:
1.
You can configure the TCP/IP settings using the Web Page configuration. Simply log in using the
Serial Device Server IP address and select TCP/IP.
Serial Device Server IP address and select TCP/IP.
Figure 2 TCP/IP Window
Advanced Configuration
Silex
Page 27
Part Number 140-00188-210A