Lucent Technologies 108596560 User Manual

Page of 91
GuestWorks and DEFINITY ECS Release 8
Hospitality Operations   
555-230-723  
Issue 6
December 1999
Hospitality Operations 
58
Voice Messaging Operations 
Restoring a Deleted Voice Message
Deleted voice messages are stored until midnight of the day they were deleted. 
For example, you can retrieve a message that a guest deleted at 6:00 p.m. up to 
midnight of that evening. In addition, messages deleted after 11:00 p.m. can be 
restored until midnight of the following day.
NOTE:
FAX messages are not saved once they are printed or delivered.
Deleted voice messages are stored on a last-in first-out basis. The last message 
that a guest deleted is the first message restored. Because messages are stored this 
way and because messages can only be restored one at a time, it is important that 
you ask the guests how many messages they have deleted since the message they 
want restored. If the message was the last one deleted, follow the procedure below 
once. If the desired message was not the last message deleted, ask the guests how 
many messages have been deleted since that one and perform the procedure that 
many times. It is much easier to restore 3 messages in a row and let the guests sort 
through them than it is to restore number 1, find out that it is not the right one, 
then restore number 1 over again in order to get to number 2.
To restore deleted voice messages, perform the following:
1. When guests call to have a deleted message restored, ask them for their 
room number, their voice messaging password, and the number of 
messages they need restored. Suggest to them that you can restore all of 
their messages and allow them to sort through the messages.
2. Verify that the guest name and room number are valid.
3. Inform the guests that you will notify them when their messages are 
restored. You can either place the call on hold or call them back.
4. Select an idle call appearance.
You hear dial tone.
5. Enter the message retrieval number.
You hear ringback tone.
The display shows the number you are calling.
6. After the voice messaging system answers, press the 
0
 button followed by 
the guest’s room extension.
A message confirms that this is a “current” guest (registered through 
the PMS).