Honeywell 1450g User Manual

The scanner contains LEDs on the rear of the unit that indicate linking status, decoding state, and battery condition.  The base 
has LEDs on the top of the unit that indicate its power up, communication, and battery charge condition.  The red LED = error; 
green LED = success of any type.  Scanners and the CCB01-010BT base have audible indicators as well: 1 razz or error tone = 
error; 2 beeps = menu change; 1 beep = all other successes.

The table below lists the indication and cause of the LED indication, beeps, and vibrations for the scanner.

The base contains a red LED and the Access Point has a blue LED that indicate the status of the unit and verifies its com-
munication with the host system.  The base also has a green LED that indicates scanner battery charge condition. 

To display the power indicator on a base or an Access Point, scan the Base Power Communication Indicator On bar 

code.  To turn off the power indicator, scan the Off bar code.  Default = On.  

Normal Operation
Red Flash

None

None

Battery low

Green Flash

1 beep

None

Successful communication or linking

Red, blinking

Razz or error tone

None

Failed communication

Menu Operation
Green Flash

2 beeps

2 vibrations

Successful menu change

Red, blinking

Razz or error tone

1 long vibration

Unsuccessful menu change

Off

USB suspend

On continuously

Power on, system idle

Short blinks in multiple pulses.  Occurs while transferring data to/
from the RF module or the Host port.

Receiving data

(base only, does not apply to Access Point)

Off

Battery not detected or charge suspended

Slow flash, 1 second on, 1 second off

Pre-charge and charging

On continuously

Charge complete

Fast flash, 300 mSec on, 300 mSec off

Charge Error