Honeywell 1450g User Manual

Page of 206
3 - 8
Error Indicators
Beeper Pitch - Base Error
The CCB01-010BT base can be configured to beep at a particular pitch when an error occurs, such as transmission prob-
lems to a host system.  The beeper pitch codes modify the pitch (frequency) of the error tone the base emits when there is 
an error.  Default = Low.
Number of Beeps - Base Error
The number of beeps and LED flashes emitted by the CCB01-010BT base for an error condition can be programmed from 
1 - 9.  For example, if you program this option to have five error beeps, there will be five error beeps and five LED flashes in 
response to an error.  To change the number of error beeps, scan the bar code below and then scan a digit (1-9) bar code 
and the Save bar code on th
 inside the back cover of this manual.  Default = 1.
Scanner Report
Scan the bar code below to generate a report for the connected scanners.  The report indicates the port, work group, scanner 
name, and address.  To assign a name to your scanner, refer to 
High (4200 Hz)
* Razz (250 Hz)
Medium (3250 Hz)
High (4200 Hz)
Number of Base Error Beeps/LED Flashes
Scanner Report